||7 12 14 16
||7 12 14 16 18
||Variable stroke. Max 48" (122cm)
||Wide range of gauge knit on a single machine.
||Max 1.4m/sec. Knitting speed varies according to
gauge and knitting condition. Variably adjustable speed levels. 10
additional programmable speeds.
||120 levels, electronically controlled.
||Motor-driven racking mechanism. Max 2-inch racking.
1/2 and1/4 pitch also available from any position.
||Triple KNITRAN system. Single R2CARRIAGE
||Simultaneous transfer, front or back, independent
of carriage direction. Split stitch possible without exchanging
||Spring-type moveable full-sinker system. v-Sinker
standard on 14G, 16G and 18G.
||Special motor-driven system allows individual
adjustment for on/off in knit and transfer.
|Needle hook conversion
||Conversion between LL-size and MM-size possible
without exchanging cams.
|(7, 12 and 14 gauge only.)
||Full jacquard selection via special solenoid
||Takedown comb with special setup needles.
||Main/sub rollers. Changeable 99 levels,
automatically adjustable on each level. Automatic opening and
||Single-unit system includes 1 yarn cutter and 2
yarn grippers. Both sides standard. Lint remover.
||Consistent loop length by digital control method.
Left side standard. 8 lightweight, compact encoders. Left side
|Yarn feed roller
||16 positions on each side. Left side double roller
standard ( SC18 gauge only).
|Yarn stopper device
||8 positions on left side (SC18 gauge only).
||16 on each side. Brake disk with 3-way adjustable
dials. Both sides standard.
||2 normal carriers + 21 intarsia carriers. (30 max.
intarsia carriers) (1).
||32 tension devices.
|One-touch easy threading. Large knots cause machine
stop. Small knots cause 0-9 courses at specified knot detection
speed, then automatically resume at set speed.
||Yarn break, large knot, wraparound check, shock
detection, piece count, over-torque, program error, etc.
||Belt drive. AC servo motor. No lubrication
||Special blower operated cleaner.
||Full safety cover for noise-suppression and
dust-proofing with stop motion sensor and interlock mechanism.
Emergency stop switch. Emergency power off device. Ultra-low speed
"crawl" setting. CE Mark. Indicator lamps (see below).
||Green/normal operation. Flashing green/normal stop.
Flashing amber/abnormal stop.